Installing a Kodak Ink Cartridge

Read about for ‘Installing a kodak ink cartridges’. If you have problem with installing ink cartridges for your kodak printers then follow the steps outlined here, it has some really good tricks and suggestions to troubleshoot the problem.

First Published at printerinkcartridges.ie

My printer wont print. I bought new Kodak ink but it did not work

A typical problem that people with Kodak printers encounter is difficulty with printing after inserting a replacement ink cartridge. If you have tried to print a colour document and only some or none of the ink are printing then it would be a good idea to follow the steps below:

1. Firstly remove all the ink cartridges from the printer.
2. Check to make sure that any tape has been removed from the cartridges.
3. Clean the contact, this is the small hole where the ink comes out as well in the printer itself, a cotton bud can be a useful tool for this. You can clean the contacts on the ink cartridge with a small amount of warm water on the cotton bud.
4. If some of the cartridges are low, replace them with new cartridges.
5. Next, turn off the printer and leave switched off for 2 minutes.
6. Insert the ink cartridges and see if this has helped clear the problem.
7. If you have some of your old original brand Kodak ink to hand you can try these in an effort to see if it is the compatibles that are causing the problem.
8. If the original cartridges fail to work then the issue is likely to be with the printer and not the ink cartridges.
9. Running the head-cleaning procedure might help if the genuine cartridges work but the compatibles do not.

All of the suggestions above are designed to find the faulty cartridges by a process of elimination. Good quality Kodak compatible ink cartridges generally are problem free but from time to time there may be issues with cartridges drying up through infrequent use. It’s a good idea to run a document through the printer from time to time to keep the ink cartridge ‘fresh’ and the ink flowing.

Shop for Kodak Ink Cartridges with Multi-pack Special Offers

First Published at printerinkcartridges.ie

My Kodak Ink Cartridges are not being Detected by My Printer

If you have a problem with your remanufactured or compatible Kodak ink cartridges being detected by your printer, then follow the simple steps outlined below.


Carefully remove the carbon strip. Once the carbon strip has been removed from the cartridge please insert the cartridge into the printer. Please make sure that you NEVER touch the chip on the ink cartridges with your bare hands as this may damage the cartridge.

Cleaning blocked heads on my Kodak printer

From time to time the heads on your printer may become clogged and you will have to perform a head cleaning cycle. If the cartridges have not been used for a while it’s possible that they might develop a clog. Strangely enough, the ink cartridges cannot develop a blockage with the ink alone but if they pick up some paper dust then it’s possible that the two combined will cause hardening of the ink.
Begin by going to the printing preferences in the Kodak printer programme and select Maintenance. Follow these instructions to access your head cleaning cycle:

• Start > (Control Panel)
• Printer > then right click on the Kodak icon
• Printing Preferences
• Maintenance
• Nozzle check
  (This is important as it will print out a sheet that will show if the cartridges are printing correctly. You can compare the printed sheet to the on-screen image of correctly performing ink cartridges).
• Head Cleaning
• Test print

You will need to repeat the nozzle check each time you perform a head cleaning cycle to ensure that the printer cleans the head thoroughly. The printer will know when you are repeated cleaning it and gradually force more ink through the nozzle in an attempt to clear the blockage. You may use up more ink than usual performing the head cleaning operation and it may result in you replacing some of your empty cartridges. It is advisable to perform ahead cleaning cycle after each ink cartridge replacement, this will be in the printer handbook under maintenance.

For people who own the older version of the Kodak ESP printers it is recommended that you don’t download the firmware updates offered by Kodak if you are using compatible ink as this may affect the cartridge recognition. Lately the firmware downloads offered by HP, Epson and Kodak have been known to have a detrimental effect on remanufactured and compatible ink cartridges.

Click Here to View Our Special Offers on Kodak Ink Cartridges

First Published at Printerinkcartridges.ie